Geekpure 20 Inch Whole House Water Filter Housing

This 20-inch whole house water filter housing is a complete set that includes the housing, a plastic wrench, screws, and a metal bracket. The filter cartridges are sold separately. The housing is equipped with an air release valve and a pressure release button for high-pressure applications.

To install this filter housing, ensure that the o-ring is properly lubricated with silicone grease and use the provided wrench to prevent leakage. If this is your first time installing a whole house water filter, you can refer to helpful installation videos on YouTube.

The filter housing has a maximum operating pressure of 90 psi, but it is recommended to install a pressure regulator if your water pressure exceeds 80 psi to prevent the water pressure from exceeding the maximum rating. The pressure regulator should be set to 60 psi or less.

The rubber o-ring provides a water-tight seal between the cap and the sump, and it is essential that the o-ring is properly seated in the groove to prevent water leaks.

This housing is designed for standard 4.5-inch diameter by 20-inch height filters. The box contents include 1 x 20-inch housing with a pressure release, 1 x plastic wrench, 1 x metal bracket, and 1 bag of screws.

There are various filter options available, including: 1. PP spun filter: Removes sand, dirt, and sediment, with a lifespan of approximately 6 months. 2. Carbon block filter: Further removes chlorine, taste, odors, and very fine particulates, with a lifespan of approximately 6 months.

The lifespan of the filter cartridges depends on the usage amount and the feed water quality.

Additional product information: - Dimensions: Standard 4.5-inch OD x 20-inch height - Manufacturer: ISO9001:2015 certified, with a 1-year limited warranty and a 30-day money-back guarantee - Flow rate: 5-15 GPM (depending on feed water pressure) - Whole house installation: Provides pure water for the entire home, from every tap and appliance

product information: